This heavy duty curved shower rod is fabricated from stainless steel with a #4 satin finish. The unit includes both the shower rod as well as the mounting flanges, which are concealed by a snap-on cover. The rod is one-inch in diameter and fabricated from 18 gauge (.049) 304 series stainless steel tubing. It is 60 inches long and provides a six-inch offset at the center of the rod. The mounting flanges are fabricated from 14 gauge, 304 series stainless steel and include a cover that snaps over the flange to conceal the mounting screws. The flange cover is fabricated from 22 gauge 304 series stainless steel and has a #4 satin finish. Each flange has three mounting holes. Due to variations in applications, mounting hardware is not included. The shower rod is fixed in place using a set screw, which is provided.
